calendar
Local and universal time, day of the week, date and time conversions.
This module provides computation of local and universal time, day of the week, and many time conversion functions.
Time is local when it is adjusted in accordance with the current time zone and daylight saving. Time is universal when it reflects the time at longitude zero, without any adjustment for daylight saving. Universal Coordinated Time (UTC) time is also called Greenwich Mean Time (GMT).
The time functions local_time/0
and
universal_time/0
in this module both return date
and time. The is because separate functions for date
and time can result in a date/time combination that is displaced
by 24 hours. This occurs if one of the functions is called
before midnight, and the other after midnight. This problem also
applies to the Erlang BIFs date/0
and time/0
, and
their use is strongly discouraged if a reliable date/time stamp
is required.
All dates conform to the Gregorian calendar. This calendar was introduced by Pope Gregory XIII in 1582 and was used in all Catholic countries from this year. Protestant parts of Germany and the Netherlands adopted it in 1698, England followed in 1752, and Russia in 1918 (the October revolution of 1917 took place in November according to the Gregorian calendar).
The Gregorian calendar in this module is extended back to year 0. For a given date, the gregorian days is the number of days up to and including the date specified. Similarly, the gregorian seconds for a specified date and time is the number of seconds up to and including the specified date and time.
For computing differences between epochs in time, use
the functions counting gregorian days or seconds. If epochs are
specified as local time, they must be converted to universal time
to get the correct value of the elapsed time between epochs.
Use of function time_difference/2
is discouraged.
Different definitions exist for the week of the year.
This module contains a week of the year implementation
conforming to the ISO 8601 standard. As the week number for a
specified date can fall on the previous, the current, or on the next
year, it is important to specify both the year and the week number.
Functions iso_week_number/0
and iso_week_number/1
return a tuple of the year and the week number.
Types
datetime1970() = {{year1970(), month(), day()}, time()}
year() = integer() >= 0
Year cannot be abbreviated. For example, 93 denotes year 93, not 1993. The valid range depends on the underlying operating system. The date tuple must denote a valid date.
year1970() = 1970..10000
month() = 1..12
day() = 1..31
hour() = 0..23
minute() = 0..59
second() = 0..59
daynum() = 1..7
ldom() = 28 | 29 | 30 | 31
weeknum() = 1..53
Functions
date_to_gregorian_days(Date) -> Days
Date = date()
Days = integer() >= 0
date_to_gregorian_days(Year, Month, Day) -> Days
Computes the number of gregorian days starting with year 0 and ending at the specified date.
datetime_to_gregorian_seconds(DateTime) -> Seconds
DateTime = datetime()
Seconds = integer() >= 0
Computes the number of gregorian seconds starting with year 0 and ending at the specified date and time.
day_of_the_week(Date) -> daynum()
Date = date()
day_of_the_week(Year, Month, Day) -> daynum()
Computes the day of the week from the specified
,
, and
. Returns the day of the week as
1
: Monday, 2
: Tuesday, and so on.
gregorian_days_to_date(Days) -> date()
Days = integer() >= 0
Computes the date from the specified number of gregorian days.
gregorian_seconds_to_datetime(Seconds) -> datetime()
Seconds = integer() >= 0
Computes the date and time from the specified number of gregorian seconds.
iso_week_number() -> yearweeknum()
Returns tuple {Year, WeekNum}
representing
the ISO week number for the actual date. To determine the
actual date, use function
local_time/0
.
iso_week_number(Date) -> yearweeknum()
Date = date()
Returns tuple {Year, WeekNum}
representing
the ISO week number for the specified date.
last_day_of_the_month(Year, Month) -> LastDay
Computes the number of days in a month.
local_time() -> datetime()
Returns the local time reported by the underlying operating system.
local_time_to_universal_time(DateTime1) -> DateTime2
DateTime1 = DateTime2 = datetime1970()
Converts from local time to Universal Coordinated Time (UTC).
must refer to a local
date after Jan 1, 1970.
Warning!
This function is deprecated. Use
local_time_to_universal_time_dst/1
instead, as it gives a more correct and complete result.
Especially for
the period that does not exist, as it is skipped during
the switch to daylight saving time, this function
still returns a result.
local_time_to_universal_time_dst(DateTime1) -> [DateTime]
DateTime1 = DateTime = datetime1970()
Converts from local time to Universal Coordinated Time (UTC).
must refer to a local
date after Jan 1, 1970.
The return value is a list of 0, 1, or 2 possible UTC times:
[]
For a local {Date1, Time1}
during the period that
is skipped when switching to daylight saving
time, there is no corresponding UTC, as the local time
is illegal (it has never occured).
[DstDateTimeUTC, DateTimeUTC]
For a local {Date1, Time1}
during the period that
is repeated when switching from daylight saving
time, two corresponding UTCs exist; one for the first
instance of the period when daylight saving time is still
active, and one for the second instance.
[DateTimeUTC]
For all other local times only one corresponding UTC exists.
now_to_datetime(Now) -> datetime1970()
Now = erlang:timestamp()
Returns Universal Coordinated Time (UTC)
converted from the return value from
erlang:timestamp/0
.
now_to_local_time(Now) -> datetime1970()
Now = erlang:timestamp()
Returns local date and time converted from the return value from
erlang:timestamp/0
.
now_to_universal_time(Now) -> datetime1970()
Now = erlang:timestamp()
Returns Universal Coordinated Time (UTC)
converted from the return value from
erlang:timestamp/0
.
seconds_to_daystime(Seconds) -> {Days, Time}
Seconds = Days = integer()
Time = time()
Converts a specified number of seconds into days, hours, minutes,
and seconds.
is always non-negative, but
is negative if argument
is.
seconds_to_time(Seconds) -> time()
Seconds = secs_per_day()
secs_per_day() = 0..86400
Computes the time from the specified number of seconds.
must be less than the number of
seconds per day (86400).
time_difference(T1, T2) -> {Days, Time}
T1 = T2 = datetime()
Days = integer()
Time = time()
Returns the difference between two {Date, Time}
tuples.
is to refer to an epoch later
than
.
Warning!
This function is obsolete. Use the conversion functions for gregorian days and seconds instead.
time_to_seconds(Time) -> secs_per_day()
Time = time()
secs_per_day() = 0..86400
Returns the number of seconds since midnight up to the specified time.
universal_time() -> datetime()
Returns the Universal Coordinated Time (UTC) reported by the underlying operating system. Returns local time if universal time is unavailable.
universal_time_to_local_time(DateTime) -> datetime()
DateTime = datetime1970()
Converts from Universal Coordinated Time (UTC) to local time.
must refer to a date after Jan 1, 1970.
valid_date(Date) -> boolean()
Date = date()
valid_date(Year, Month, Day) -> boolean()
Year = Month = Day = integer()
This function checks if a date is a valid.
Leap Years
The notion that every fourth year is a leap year is not completely true. By the Gregorian rule, a year Y is a leap year if one of the following rules is valid:
-
Y is divisible by 4, but not by 100.
-
Y is divisible by 400.
Hence, 1996 is a leap year, 1900 is not, but 2000 is.
Date and Time Source
Local time is obtained from the Erlang BIF localtime/0
.
Universal time is computed from the BIF universaltime/0
.
The following fapply:
- There are 86400 seconds in a day.
- There are 365 days in an ordinary year.
- There are 366 days in a leap year.
- There are 1461 days in a 4 year period.
- There are 36524 days in a 100 year period.
- There are 146097 days in a 400 year period.
- There are 719528 days between Jan 1, 0 and Jan 1, 1970.